Cylinders Akoterm С

The AKOTERM Ts heat-insulating cylinders are lightweight, load-resistant mineral wool products with a synthetic binder, designed for thermal insulation of pipelines. The temperature of the insulated surfaces should be in the range from -120 ° C to 250 ° C with a coating layer and from -120 ° C to 400 ° C without coating. The coating layer for the AKOTERM cylinders is aluminum foil. The products are ready to use.

Legend Examples:

AKOTERM mineral wool cylinder, grade 100, uncoated, 1000 mm long, 76 mm inner diameter and 40 mm thick:

C 100-1000.76.40 TU BY 101474788.002 – 2011
AKOTERM mineral wool cylinder, grade 100, coated with aluminum foil, 1000 mm long, 76 mm inner diameter and 40 mm thick:

C 100/А-1000.76.40 TU BY 101474788.002 – 2011

Specifications:

Name of the indicator	Value for brand product C100 и C100/А
Length	1000
Inner diameter	18, 22, 25, 28, 32, 35, 38, 42, 45, 48, 54, 57, 60, 64, 70, 76, 89, 108, 114
Thickness	20, 30, 40, 50, 60
Density, kg/m3	from 75 to 125
Thermal conductivity, W / (m·K) At a temperature: - (298 ± 5) К (25 ± 5) °С - (398 ± 5) К (125 ± 5) °С	no more than 0,044 no more than 0,060
Tensile strength in tension, MPa	not less than 0.015
Humidity, % by weight	no more than 1
Flammability Group: Ц 100 Ц 100/А	NG G1*

* Flammability group of NG mineral wool, flammability group of aluminum foil G1.

The main features and advantages of AKOTERM heat-insulating cylinders and half-cylinders:

mechanical strength;
due to its light weight and meter length, installation time is significantly reduced;
the ability to use on bent and bent bends;
reliable protection of pipelines of cold water supply against formation of condensate.

Recommendations for transportation, storage and installation

When storing and transporting, protect the cylinders from moisture. Cylinders packed in technological packages must be stored and shipped in a vertical position to a height of not more than one meter.

Cylinders are installed on the pipeline. The longitudinal seams and joints of the cylinders are glued with a special aluminum tape, which allows for reliable protection of the insulation and the pipeline from penetration and loss of condensate. The cylinder is fastened with galvanized metal wire, steel or polypropylene tape in the amount of three bandages per cylinder.

Helpful information

This section presents the calculation tables that will help simplify the work of design institutes, customers, contractors and other interested organizations.

Calculation table of thermal insulation thicknesses for pipelines located in the room

Thermal insulation cylinders made of AKOTERM Ts 100 mineral wool.

Outside diameter pipes, mm	Insulated surface temperature, °С
Outside diameter pipes, mm	50	75	100	125	150	175	200	225	250
18	29	38	45	49	52	54	56	59	62
25	29	40	47	52	55	57	60	63	67
32	30	41	48	55	61	63	65	68	72
45	35	44	51	59	66	69	72	75	78
57	38	48	55	62	67	71	75	80	85
76	38	51	61	67	72	77	83	87	91
89	40	54	63	70	75	81	86	91	95
108	44	57	66	74	80	86	92	96	100

Calculation table of thermal insulation thicknesses for pipelines located outdoors

Thermal insulation cylinders made of AKOTERM Ts 100 mineral wool.

Outside diameter pipes, mm	Insulation temperature, °С
Outside diameter pipes, mm	50	75	100	125	150	175	200	225	250
18	33	41	49	57	63	65	68	71	75
25	37	46	54	61	68	70	73	77	81
32	40	52	62	66	70	74	80	83	87
45	48	58	66	72	77	83	89	93	98
57	48	59	68	77	84	90	96	99	102
76	52	65	75	83	89	95	100	105	110
89	56	68	79	87	93	99	195	111	117
108	57	72	83	92	99	105	111	117	122

Length of mounting material (wire or bandage)

In linear meters per 1 meter linear pipeline for fastening AKOTERM thermal insulation cylinders.

Pipe diameter, mm	The thickness of the insulating layer, mm
Pipe diameter, mm	20	30	40	50	60	70	80	90	100
18	0,63	0,84	1,06	1,28	1,49	1,71	1,93	2,14	2,36
22	0,67	0,89	1,10	1,32	1,54	1,75	1,97	2,19	2,40
25	0,70	0,92	1,14	1,35	1,57	1,79	2,00	2,22	2,44
28	0,74	0,95	1,17	1,39	1,60	1,82	2,04	2,25	2,47
32	0,78	0,99	1,21	1,43	1,65	1,86	2,08	2,30	2,51
35	0,81	1,03	1,25	1,46	1,68	1,90	2,11	2,33	2,55
38	0,84	1,06	1,28	1,49	1,71	1,93	2,14	2,36	2,58
42	0,89	1,10	1,32	1,54	1,75	1,97	2,19	2,40	2,62
45	0,92	1,14	1,35	1,57	1,79	2,00	2,22	2,44	2,65
48	0,95	1,17	1,39	1,60	1,82	2,04	2,25	2,47	2,69
54	1,02	1,23	1,45	1,67	1,88	2,10	2,32	2,53	2,75
57	1,05	1,27	1,48	1,70	1,92	2,13	2,35	2,57	2,78
60	1,08	1,30	1,52	1,73	1,95	2,17	2,38	2,60	2,82
64	1,13	1,34	1,56	1,78	1,99	2,21	2,43	2,64	2,86
70	1,19	1,41	1,62	1,84	2,06	2,27	2,49	2,71	2,92
76	1,26	1,47	1,69	1,91	2,12	2,34	2,56	2,77	2,99
89	2,00	1,61	1,83	2,05	2,22	2,48	2,70	2,91	3,13
108	1,60	1,82	2,04	2,25	2,47	2,69	2,90	3,12	3,34
114	1,67	1,88	2,10	2,32	2,53	2,75	2,97	3,18	3,40
133	1,87	2,09	2,31	2,52	2,74	2,96	3,17	3,39	3,61
159	2,16	2,37	2,59	2,81	3,02	3,24	3,46	3,67	3,89
219	2,81	3,67	3,24	3,46	3,67	3,89	4,11	4,32	4,54

Aluminum tape consumption

In meters running for 1 meter running cylinders of heat-insulating AKOTERM with a coating - aluminum foil.

Pipe diameter, mm	The thickness of the insulating layer, mm
Pipe diameter, mm	20	30	40	50	60	70	80	90	100
18	1,6	1,8	1,9	2,1	2,2	2,5	2,7	3,0	3,1
22	1,7	1,8	2,0	2,1	2,3	2,5	2,7	3,0	3,1
28	1,7	1,9	2,0	2,2	2,3	2,6	2,8	3,1	3,1
32	1,7	1,9	2,0	2,2	2,3	2,6	2,8	3,1	3,2
35	1,8	1,9	2,1	2,2	2,4	2,6	2,8	3,1	3,2
38	1,8	1,9	2,1	2,2	2,4	2,7	2,9	3,1	3,2
42	1,8	2,0	2,1	2,3	2,4	2,7	2,9	3,2	3,3
45	1,8	2,0	2,1	2,3	2,4	2,7	2,9	3,2	3,3
48	1,9	2,0	2,2	2,3	2,5	2,8	3,0	3,2	3,3
54	1,9	2,1	2,2	2,4	2,5	2,8	3,0	3,3	3,4
57	1,9	2,1	2,2	2,4	2,5	2,9	3,0	3,3	3,4
60	2,0	2,1	2,3	2,4	2,6	2,9	3,1	3,4	3,4
64	2,0	2,1	2,3	2,4	2,6	2,9	3,1	3,4	3,5
70	2,0	2,2	2,3	2,5	2,6	3,0	3,2	3,4	3,5
76	2,1	2,2	2,4	2,5	2,7	3,0	3,2	3,5	3,6
89	2,2	2,3	2,5	2,6	2,8	3,2	3,3	3,6	3,7
108	2,3	2,5	2,6	2,8	2,9	3,3	3,5	3,8	3,9
114	2,4	2,5	2,7	2,8	3,0	3,4	3,6	3,9	4,0
133	2,6	2,8	3,0	3,2	3,4	3,6	3,8	4,0	4,1
159	2,9	3,1	3,25	3,4	3,6	3,8	4,0	4,3	4,4
219	3,4	3,62	3,81	4,0	4,2	4,4	4,6	4,9	4,9

Convert linear meters to cubic

Calculation table for the conversion of 1 meter of linear insulating cylinders AKOTERM to 1 meter cubic

Pipe diameter, mm	Insulation layer thickness
Pipe diameter, mm	20	30	40	50	60	70	80	90	100
18	0,002386	0,004522	0,007285	0,010676	0,014695	–	–	–	–
22	0,002638	0,004898	0,007787	0,011304	0,015449	–	–	–	–
25	0,002826	0,005181	0,008164	0,011775	0,016014	–	–	–	–
28	0,003014	0,005464	0,008541	0,012246	0,016579	–	–	–	–
32	0,003266	0,00584	0,009043	0,012874	0,017333	0,02242	–	–	–
35	0,003454	0,006123	0,00942	0,013345	0,017898	0,023079	0,028888	0,035325	0,04239
38	0,003642	0,006406	0,009797	0,013816	0,018463	0,023738	0,029642	0,036173	0,043332
42	0,003894	0,006782	0,010299	0,014444	0,019217	0,024618	0,030646	0,037303	0,044588
45	0,004082	0,007065	0,010676	0,014915	0,019782	0,025277	0,0314	0,038151	0,04553
48	0,00427	0,007348	0,011053	0,015386	0,020347	0,025936	0,032154	0,038999	0,046472
54	0,004647	0,007913	0,011806	0,016328	0,021478	0,027255	0,033661	0,040694	0,048356
57	0,004836	0,008195	0,012138	0,016799	0,022043	0,027915	0,034414	0,041542	0,049298
60	0,005024	0,008478	0,01256	0,01727	0,022608	0,028574	0,035168	0,04239	0,05024
64	0,005275	0,008855	0,013062	0,017898	0,023362	0,029453	0,036173	0,04352	0,051496
70	0,005652	0,00942	0,013816	0,01884	0,024492	0,030772	0,03768	0,045216	0,05338
76	0,006029	0,009985	0,01457	0,019782	0,025622	0,032091	0,039187	0,046912	0,055264
89	0,006845	0,01121	0,016202	0,021823	0,028072	0,034948	0,042453	0,050585	0,059346
108	0,008038	0,01300	0,018589	0,024806	0,031651	0,039124	0,047226	0,055955	0,065312
114	0,008415	0,013565	0,019342	0,025748	0,032782	0,040443	0,048733	0,05765	0,067196
133	0,009608	0,015355	0,021729	0,028731	0,036361	0,044619	0,053506	0,06302	0,073162
159	0,011241	0,017804	0,024994	0,032813	0,04126	0,050334	0,060037	0,070367	0,081326
219	–	–	–	–	0,042233	0,063522	0,075109	0,087323	0,100166

Feedbacks

“Thermal insulation cylinders“ AKOTERM ”made of mineral wool, used for thermal insulation of heating pipelines, hot and cold water supply, in their characteristics can be used along with Rockwool, Paroc, Izover cylinders”.

Yakimovich VP, chief engineer of RUE “BELNIPIENERGOPROM”

“The cylinders were easily mounted on pipes due to a longitudinal section in the product. After that, the longitudinal section and transverse joints were glued with aluminum tape, which provided reliable protection of the insulation and the pipeline from penetration and condensation”.

Serikov M.S., Head of the NSR No. 367 at Art. Minsk

“The cylinders were made with the coating material of their aluminum foil for a specific diameter of pipelines. Due to the low weight and meter length of the heat-insulating cylinders, the installation time was significantly reduced. We consider it possible to use AKOTERM heat-insulating cylinders in the construction and reconstruction of facilities”.

Batan V.V., Director of SANGRAND LLC

Contacts

Sale Akoterm C, Akoterm STI

Akoterm Berezino Private Enterprise

223053, Belarus, Minsk, Borovlyany, ul. Logoiskaya, 6

Working hours:

From 8:30 to 17:00
Sat, Sun — day off

+375 17 505-29-19

+375 17 548-46-48 (tel/fax)

+375 17 505-17-03

+375 44 749-37-41 (A1)

+375 33 602-72-09 (MTS)

akoterm@mail.ru